Factory Customized China Cube2 C17200 Copper Strip Beryllium Copper Factory
We take “customer-friendly, quality-oriented, integrative, innovative” as objectives. “Truth and honesty” is our administration ideal for Factory Customized China Cube2 C17200 Copper Strip Beryllium Copper Factory, We focus on to make exceptional excellent products and solutions to provide assistance for our purchasers to determine long-term win-win partnership.
We take “customer-friendly, quality-oriented, integrative, innovative” as objectives. “Truth and honesty” is our administration ideal for China Copper, Steel, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this, our merchandise are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
1. Chemical Composition of C72700
Model |
Ni |
Sn |
Mn |
Pb |
Zn |
Fe |
P |
Impurities |
Cu |
C72700 |
8.5-9.5 |
5.5-6.5 |
0.05-0.3 |
≤0.03 |
≤0.15 |
≤0.05 |
≤0.05 |
≤0.5 |
Remnant |
2. Physical Properties of C72700
Density |
8.9 |
(g/cm3) |
Melting Point |
968-1078 |
(℃) |
Thermal Expansion Coefficient |
17.25 |
(X10-6/℃) 20-200℃ |
Elastic Modulus |
120 |
(GPa) |
Electrical Resistivity at 20℃ |
|
μΩ*cm |
Quench |
≤19.5 |
|
Precipitation Hardening |
≤15 |
|
Electrical Conductivity(IACS,%) |
|
(% IACS) |
≥9 |
|
|
Precipitation hardening(3 hours) |
≥12 |
|
Torsional Modulus |
50 |
(GPa) |
Thermal Conductivity at 20℃ |
53.6 |
(W/m.K) |
Bending Fatigue Strength |
450 |
(MPa) |
3. Mechanical Properties/State of C72700
1) Rolled Products
State |
Hardness |
Tensile Strength |
Yield Strength |
Elongaion |
Bending* |
Hardness, Elasticity and Bending Fatigue Properties(MPa) |
||
HV |
Rm (MPa) |
Rp 0.2 (MPa) |
A50mm (%) |
Longitudinal// |
Transverse⊥ |
Longitudinal// |
Transverse⊥ |
|
Quenching |
||||||||
TB |
90-125 |
420-500 |
≥200 |
≥30 |
0.2 |
0.2 |
302 |
220 |
Quenching/Cold Rolling |
||||||||
TD1 |
140-180 |
460-560 |
≥300 |
≥15 |
0.2 |
0.2 |
216 |
359 |
TD2 |
160-200 |
540-640 |
≥400 |
≥10 |
0.2 |
0.2 |
275 |
390 |
TD3 |
200-240 |
620-720 |
≥550 |
≥3 |
0.5 |
0.5 |
444 |
523 |
TD4 |
220-260 |
700-820 |
≥600 |
≈1 |
2 |
1 |
467 |
568 |
TDX |
≤320 |
≥780 |
≥650 |
≈1 |
10 |
2 |
472 |
613 |
Quenching/Precipitation Heat Treatment |
||||||||
TF |
230-270 |
740-860 |
≥510 |
≥10 |
0.5 |
0.5 |
566 |
634 |
Quenching/Cold Rolling/Precipitation Heat Treatment |
||||||||
TH1 |
270-310 |
850-950 |
≥650 |
≥8 |
0.5 |
0.5 |
684 |
724 |
TH2 |
290-320 |
880-980 |
≥720 |
≥8 |
1 |
1 |
730 |
770 |
TH3 |
310-340 |
950-1050 |
≥800 |
≥4 |
1 |
1 |
829 |
≥840 |
TH4 |
320-360 |
1000-1100 |
≥900 |
≈3 |
2 |
2 |
≥830 |
≥840 |
THX |
≤390 |
≥1050 |
≥950 |
≈1 |
/ |
/ |
≥830 |
≥840 |
*:According to DIN 5011(25/10/85),bending 90 ° along the rolling direction, divide the minimum bending radius by the thickness to determine the R /t ratio |
2) Drawn products
State |
Hardness |
Tensile Strength |
Yield Strength |
Elongaion |
Expansion Coefficient |
HV |
Rm (MPa) |
Rp 0.2 (MPa) |
A50mm (%) |
Z% |
|
Quenching |
|||||
TB |
≤150 |
400-500 |
≥200 |
≥30 |
≥80 |
Quenching/Cold Rolling |
|||||
TD1 |
150-180 |
500-580 |
≥300 |
≥10 |
≥75 |
TD2 |
180-230 |
550-720 |
≥500 |
≥3 |
≥70 |
TD3 |
220-260 |
700-800 |
≥600 |
≥2 |
≥65 |
TD4 |
230-300 |
780-880 |
≥700 |
≥1.5 |
≥60 |
TDX |
250-320 |
880-1000 |
≥800 |
≥0.1 |
≥50 |
|
|
|
|
|
|
State |
HV |
Rm (MPa) |
Rp 0.2 (MPa) |
A50mm (%) |
Z% |
Quenching/Precipitation Heat Treatment |
|||||
TF |
≤260 |
770-870 |
≥500 |
≥20 |
≥40 |
Quenching/Cold Rolling/Precipitation Heat Treatment |
|||||
TH1 |
260-300 |
870-970 |
≥700 |
≥13 |
≥30 |
TH2 |
290-310 |
930-1030 |
≥800 |
≥8 |
≥30 |
TH3 |
310-330 |
1000-1100 |
≥900 |
≥5 |
≥30 |
TH4 |
330-360 |
1100-1200 |
≥1000 |
≥2 |
≥30 |
THX |
≥350 |
1175-1300 |
≥1100 |
≥0.5 |
≥30 |
4. Standard Tolerance of Rod and Wire of C72700
Type |
Diameter |
Tolerance of Diameter |
Tolerance of Straightness |
|||
inch |
mm |
inch |
mm |
inch |
mm |
|
Wire |
0.2-0.39 |
6.35-9.9 |
+/-0.002 |
+/-0.05 |
length=10ft,deviation<0.25 inches |
length=3048mm,deviation<6.35mm |
0.4-0.74 |
10-18.9 |
+0.005/-0 |
+0.13/-0 |
|||
Rod |
0.75-1.6 |
19-40.9 |
+0.02/+0.08 |
+0.5/+2.0 |
length=10ft,deviation<0.5 inches |
length=3048mm,deviation<12mm |
1.61-2.75 |
41-70 |
+0.02/+0.10 |
+0.02/+0.10 |
|||
2.76-3.25 |
70.1-82 |
+0.02/+0.145 |
+0.02/+0.145 |
|||
3.26-6.00 |
83-152.4 |
+0.02/+0.187 |
+0.02/+0.187 |
|||
<0.4 |
<10 |
+/-0.002 |
+/-0.05 |
|
|
5. Application of C72700
Substituting beryllium copper alloy
It is used for glasses, electricians, electromechanical, electronics, connectors, automobiles, household appliances, spectade industry, turning partsWe take “customer-friendly, quality-oriented, integrative, innovative” as objectives. “Truth and honesty” is our administration ideal for Factory Customized China Cube2 C17200 Copper Strip Beryllium Copper Factory, We focus on to make exceptional excellent products and solutions to provide assistance for our purchasers to determine long-term win-win partnership.
Factory Customized China Copper, Steel, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this, our merchandise are sold very well in the countries in Africa, the Mid-East and Southeast Asia.