Good Wholesale Vendors Cw102c Bar - KINKOU-96 copper alloy(Cu-9Ni-6Sn C72700) – Kinkou
Good Wholesale Vendors Cw102c Bar - KINKOU-96 copper alloy(Cu-9Ni-6Sn C72700) – Kinkou Detail:
1. Chemical Composition of C72700
Model |
Ni |
Sn |
Mn |
Pb |
Zn |
Fe |
P |
Impurities |
Cu |
C72700 |
8.5-9.5 |
5.5-6.5 |
0.05-0.3 |
≤0.03 |
≤0.15 |
≤0.05 |
≤0.05 |
≤0.5 |
Remnant |
2. Physical Properties of C72700
Density |
8.9 |
(g/cm3) |
Melting Point |
968-1078 |
(℃) |
Thermal Expansion Coefficient |
17.25 |
(X10-6/℃) 20-200℃ |
Elastic Modulus |
120 |
(GPa) |
Electrical Resistivity at 20℃ |
|
μΩ*cm |
Quench |
≤19.5 |
|
Precipitation Hardening |
≤15 |
|
Electrical Conductivity(IACS,%) |
|
(% IACS) |
≥9 |
|
|
Precipitation hardening(3 hours) |
≥12 |
|
Torsional Modulus |
50 |
(GPa) |
Thermal Conductivity at 20℃ |
53.6 |
(W/m.K) |
Bending Fatigue Strength |
450 |
(MPa) |
3. Mechanical Properties/State of C72700
1) Rolled Products
State |
Hardness |
Tensile Strength |
Yield Strength |
Elongaion |
Bending* |
Hardness, Elasticity and Bending Fatigue Properties(MPa) |
||
HV |
Rm (MPa) |
Rp 0.2 (MPa) |
A50mm (%) |
Longitudinal// |
Transverse⊥ |
Longitudinal// |
Transverse⊥ |
|
Quenching |
||||||||
TB |
90-125 |
420-500 |
≥200 |
≥30 |
0.2 |
0.2 |
302 |
220 |
Quenching/Cold Rolling |
||||||||
TD1 |
140-180 |
460-560 |
≥300 |
≥15 |
0.2 |
0.2 |
216 |
359 |
TD2 |
160-200 |
540-640 |
≥400 |
≥10 |
0.2 |
0.2 |
275 |
390 |
TD3 |
200-240 |
620-720 |
≥550 |
≥3 |
0.5 |
0.5 |
444 |
523 |
TD4 |
220-260 |
700-820 |
≥600 |
≈1 |
2 |
1 |
467 |
568 |
TDX |
≤320 |
≥780 |
≥650 |
≈1 |
10 |
2 |
472 |
613 |
Quenching/Precipitation Heat Treatment |
||||||||
TF |
230-270 |
740-860 |
≥510 |
≥10 |
0.5 |
0.5 |
566 |
634 |
Quenching/Cold Rolling/Precipitation Heat Treatment |
||||||||
TH1 |
270-310 |
850-950 |
≥650 |
≥8 |
0.5 |
0.5 |
684 |
724 |
TH2 |
290-320 |
880-980 |
≥720 |
≥8 |
1 |
1 |
730 |
770 |
TH3 |
310-340 |
950-1050 |
≥800 |
≥4 |
1 |
1 |
829 |
≥840 |
TH4 |
320-360 |
1000-1100 |
≥900 |
≈3 |
2 |
2 |
≥830 |
≥840 |
THX |
≤390 |
≥1050 |
≥950 |
≈1 |
/ |
/ |
≥830 |
≥840 |
*:According to DIN 5011(25/10/85),bending 90 ° along the rolling direction, divide the minimum bending radius by the thickness to determine the R /t ratio |
2) Drawn products
State |
Hardness |
Tensile Strength |
Yield Strength |
Elongaion |
Expansion Coefficient |
HV |
Rm (MPa) |
Rp 0.2 (MPa) |
A50mm (%) |
Z% |
|
Quenching |
|||||
TB |
≤150 |
400-500 |
≥200 |
≥30 |
≥80 |
Quenching/Cold Rolling |
|||||
TD1 |
150-180 |
500-580 |
≥300 |
≥10 |
≥75 |
TD2 |
180-230 |
550-720 |
≥500 |
≥3 |
≥70 |
TD3 |
220-260 |
700-800 |
≥600 |
≥2 |
≥65 |
TD4 |
230-300 |
780-880 |
≥700 |
≥1.5 |
≥60 |
TDX |
250-320 |
880-1000 |
≥800 |
≥0.1 |
≥50 |
|
|
|
|
|
|
State |
HV |
Rm (MPa) |
Rp 0.2 (MPa) |
A50mm (%) |
Z% |
Quenching/Precipitation Heat Treatment |
|||||
TF |
≤260 |
770-870 |
≥500 |
≥20 |
≥40 |
Quenching/Cold Rolling/Precipitation Heat Treatment |
|||||
TH1 |
260-300 |
870-970 |
≥700 |
≥13 |
≥30 |
TH2 |
290-310 |
930-1030 |
≥800 |
≥8 |
≥30 |
TH3 |
310-330 |
1000-1100 |
≥900 |
≥5 |
≥30 |
TH4 |
330-360 |
1100-1200 |
≥1000 |
≥2 |
≥30 |
THX |
≥350 |
1175-1300 |
≥1100 |
≥0.5 |
≥30 |
4. Standard Tolerance of Rod and Wire of C72700
Type |
Diameter |
Tolerance of Diameter |
Tolerance of Straightness |
|||
inch |
mm |
inch |
mm |
inch |
mm |
|
Wire |
0.2-0.39 |
6.35-9.9 |
+/-0.002 |
+/-0.05 |
length=10ft,deviation<0.25 inches |
length=3048mm,deviation<6.35mm |
0.4-0.74 |
10-18.9 |
+0.005/-0 |
+0.13/-0 |
|||
Rod |
0.75-1.6 |
19-40.9 |
+0.02/+0.08 |
+0.5/+2.0 |
length=10ft,deviation<0.5 inches |
length=3048mm,deviation<12mm |
1.61-2.75 |
41-70 |
+0.02/+0.10 |
+0.02/+0.10 |
|||
2.76-3.25 |
70.1-82 |
+0.02/+0.145 |
+0.02/+0.145 |
|||
3.26-6.00 |
83-152.4 |
+0.02/+0.187 |
+0.02/+0.187 |
|||
<0.4 |
<10 |
+/-0.002 |
+/-0.05 |
|
|
5. Application of C72700
Substituting beryllium copper alloy
It is used for glasses, electricians, electromechanical, electronics, connectors, automobiles, household appliances, spectade industry, turning parts
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Good Wholesale Vendors Cw102c Bar - KINKOU-96 copper alloy(Cu-9Ni-6Sn C72700) – Kinkou , The product will supply to all over the world, such as: Cyprus, Kenya, British, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Betsy from Poland - 2018.10.31 10:02
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Betsy from Norwegian - 2017.09.28 18:29